This is a great to store all your bits and drivers into 1 organized package. With the added belt holster its always on you side when you need it!
18-Bit Bracket
$8.50
Unit price
/
Unavailable
Couldn't load pickup availability
Description
Fix It Sticks molded bracket.
Version A: Holds Ratcheting T-Way Wrench with Locking Hex Drive and 17 different bits (3 in the Wrench, 12 in the body of the bracket, and 1 in each end).
Version B: Holds two Fix It Sticks and 18 different bits (4 in the sticks, 12 in the body of the bracket, and 1 in each end).
Warning for California Residents
WARNING: This product can expose you to lead, which is know to the State of California to cause cancer birth defects or reproductive harm. (For more information go to www.p65warnings.ca.gov)
18-Bit Bracket
Customer Reviews
Overall rating: 4.8 / 5 from 30 reviews.
I wanted a compact way to carry all the tools I'd ever need to work with my handgun and associated accessories. With a small carrying case, space is of course at a premium, but this bracket has really delivered. In addition to the modular T-drive, I'm able to fit all the hex bits (T8, T10, P2, .050" Hex, 3/32" Flat) on one side. I'm also able to fit a 3/32" roll pin punch and the coin slot battery cap tool on the two ends as they have deeper recessions. While there's no great way to attention the mini torque driver or brass hammer head, those hold quite well in modular T drive since its magnetized. While it's not designed for this, I found that you can also fit the mini torque driver and handle of the modular T-drive into the rubber slots intended for the modular T-drive shaft. They're a little too big so the hold on them is not super secure, but it does make the overall setup a bit more compact.
Great way to keep it all together. Well built flexible rubber type material. Much better construction than I expected. Highly recommend. Was hoping to carry in my front pocket but a little too big for that. Will have to order the smaller case for that. Great product and fast shipping!
Hello, The 18-Bit bracket for the ratcheting T-Way wrench holder is awesome!!! Everything, the wrench and bits are all in one place, what a convenience, it’s made of a tough softer kind of plastic/rubber and I think it will last a long, long time. On another note, I want to compliment “Fix It Sticks Customer Service”, I had a small problem with another order and they were fast to correct the issue, amazing service, no questions asked. That alone will make me come back and shop again. Thank you Mike, Toronto, Ontario
I got this 18 bit bracket as the heart of a fix-it-stick custom kit for my new shotgun. I got the bracket plus 2 bits each of every bit needed for any of the screws on the gun plus 2 replacement sticks. This "custom" shotgun kit" lives in the case I carry the shotgun in going to and from the range or the woods... Thanx for the parts to make the kit!
This is a really nicely designed holder for the Fix it Stix ratcheting T-way wrench. It holds the wrench nice and compactly, and the rubber provides just the right amount of grip to hold bits snugly, but not make it too difficult to get them out. This fixes the only gripe I had with the T-wrench which was just that it was awkward to carry, especially with bits.
I like the way it is designed to receive the Ratcheting T-Way Wrench with Locking Hex Drive. The entire line up of Fix It Sticks is terrific. I have slowly added to my kit & am very happy with it.
Get one of these for the bits. Very handy/convenient
Great tool carrier
Perfect
Love the form factor of this. Keeps everything tidy.
very good
Pretty cool case
Everything fits nice and snug, able to carry a nice amount of bits without adding too much bulk in your pocket.
Stores my stix and bits more securely so less of a chance to lose a bit. Also has room for lots of bit an is a small pocket size package
no
First off, the Fixit Sticks ratcheting locking t way driver is the best pocket/edc screwdriver on the market, period. I love it so much I bought two. The 18 bit holder is high quality as well, just be aware that it is bulky. If you just want a pocket friendly thing to hold the two parts of the driver, this likely won’t work for you. BUT, that said, it is a great compact way to keep the driver and most bits you’ll need together and organized. 4 stars just because I was originally shipped the wrong holder, but they did resend the correct one at no charge when I contacted them. Also, I ordered another one and this time the correct item shipped. So I would say service is very good. I would not hesitate to buy more products from Fixit Sticks.
now i keep my favorite tool in my pocket at all times. great for work, i repair medical equipment at multiple different clinics. my ratcheting, locking t handle fix-it stick is now my goto piece.
Great way to organize all your bits. Thanks.
These are great...would be even better if the bit holder didn't have a bottom. This would allow for larger bits to slide through and still have a symetrical or balanced bundle with longer bits.
Great quality, highly effective. You. can't go wrong with Fix-It-Sticks!
This hold all the bits I need plus!
Great to care around!
Very pratical and compact, it is the ideal companion, it will accompany you everywhere without cluttering or overlaoding you.
Handy when you carry just what you need in a tight package.
haven't loaded this up yet, but I anticipate setting this up so that I have all the necessary bits in one spot for one specific firearm
This is a must have. Perfect way to store all the bits you need.
When I purchased my fix-it-sticks through the Kickstarter they came with a small pouch made from a recycled bicycle inner tube. Well, after years of use and travel that pouch has worn and begun to fall apart. I find this holder to be a fantastic replacement. It holds both sticks securely, while also making them faster to access. It also hold more bits and makes swapping bits faster and easier. I no longer have to fiddle with a fragile plastic tube, and try not to lose bits on the side of the road as I'm trying to swap in one of the bits that was in the middle of the tube. The key-loop is perfect for clipping to the key-tether of a bicycle saddle bag or motorcycle tank bag so that it doesn't get lost. Every pair of fix-it-sticks should come with this holder.
Perfect way to store Fix-ir-sticks in a tool box or kitchen drawer, keeps all the pieces together aand handy to use.
First of all,how would you write a review for replacement Fix-It-Sticks? They are a tool system so unique & ingenious that they actually created a category of which they are by definition the definition. Others that I can think of are Knipex cobra/plierswrench, Silky saws, Victorinox Swiss Army Knives, etc., etc.. So how does one improve on a definition of the category they created?????? You A): give it a home; & B): improve its versatility. This holder does both in such a way as to complement the ingenuity of the"Sticks" design & function. This holder kind of completes the trifecta of the ultra-small fits-in-one-hand tool kit(this holder w/"sticks" & appropriate bits/nutdrivers [screw/drive it], a 6"Knipex cobra [hold/grip/squeeze it], & a Victorinox Swisschamp [cut/file/saw/magnify/open/whatever else it]). My only question is why did it take so long to come up with the idea of this holder....oh yeah, genius takes time! This is the perfect complement to the replacement Fix-It-Sticks & I would highly recommend.
Portable
Don’t drag large, single-use tools into the field. Bring The Works to build what you need on the spot and tackle nearly anything.
Precision
With tools like our Individual Torque Limiters or All-in-One Torque Driver, you can work with incredible precision on the fly.
Performance
Made from the highest-quality materials and machined to fit each other precisely, parts are even magnetized to lock securely in place.
