Use the Fix It Sticks Scope Jack to quickly and easily level your scope to your NATO or Pic rail.
Using the level is easy: simply mount the Scope Jack to your rifle's NATO or Pic rail, under your scope. Turn the Scope Jack d. . .
Show More
Use the Fix It Sticks Scope Jack to quickly and easily level your scope to your NATO or Pic rail.
Using the level is easy: simply mount the Scope Jack to your rifle's NATO or Pic rail, under your scope. Turn the Scope Jack drive handle (the Scope Jack works with any 1/4" driver) until the lifting arm engages with the flat section of the scope under its turrets. Once the scope is level, maintain pressure to keep scope level while tightening your ring screws.
In cases of minimal clearance, it may be necessary to remove the thumb screw and clamp, then slide the Scope Jack onto the rail from the side and reassemble.
Requirements:
• Needs a minimum of 1/4" clearance between rail and scope bottom.
• Works on any scope with a flat section under the turrets.
• The NATO/Pic rail must be accessible under the optic.
• Will not work with one piece mounts.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
WARNING: This product can expose you to lead, which is know to the State of California to cause cancer birth defects or reproductive harm. (For more information go to www.p65warnings.ca.gov)
The Fix-It Sticks Scope Jack is a superbly engineered device.
Checking its tolerances and the clearance needed for its use was not possible before the arrival of the Kahles 5251 DLR scope and Spuhr 4616 cantilevered 20 MOA mount.
Since the clearance space between the scope tube and the mount was only 3.5mm, there was no room to use the 12.5 mm Scope Jack, even with its superior design and solid qualities.
However, I know a buddy of mine with many more rifles, scope and mounts than me to whom this can be gifted for his immediate use.
Stephen M.5/5Verified
I've always had very good mechanical intuition and ability. So, when I first saw the FixIt Sticks Scope Jack, I knew instantly it was a genius idea. Scopes are manufactured so that the reticles are perfectly aligned 90 degrees to the flat bottom of the scope. Therefore, securely mount the scope jack in place, lift it up against the bottom of the scope so that it makes perfect contact, secure your rings, done!
I did the entire process with the gun riding on my lap. No gun vice needed! Next I'll attach a FixIt Sticks bubble level, level the gun, then attach a permanent level to the tube of the scope.
The Scope Jack looks like it was engineered just for my rifle. Perfect fit; I might just leave it on the gun, just to freak people out and make them ask, "What the hell is that?" Awesome product.
David M.5/5Verified
I’ve used most things out there. Starrett, Wheeler, Ariska. This thing checks out as the simplest most accurate method. I double checked the level using the light-shadow-string method against a far wall— it was spot on. I’ll trust it. Thanks for another great tool.
Byron C.5/5
Very good
Faed A.5/5Verified
Good
Faed A.5/5Verified
Discovering the Fix It Sticks toolkits has been like night and day for me. And this scope ally implement is super cookie. Thanks friends. It is my second purchase and it will not be the last from Europe.
Angel C.5/5Verified
Works well! Easy to use at home or in the field if need be. It’s nice knowing I could shift my scope position in the field and easily level the scope in the process.
Adam G.5/5Verified
I have used it to level two high end scopes tonight, and couldn’t be more pleased with ease of use and accuracy. I am very OCD, so I used the the Scope Jack, and multiple levels (picatinny bubble level, magnetic level, and magazine level) to verify these two guns are dead on. After the two scopes were completed, I feel confident that a bubble level is not needed. This is a $5,700 rig, why not spend $50 to make sure it shoots like a $5,700 gun at range.
Winston W.5/5Verified
Simple, quick, easy to use!
Robin E.5/5Verified
1 word for the scope jack!
Simply
Robin E.5/5
Cool little tool and made sight install easy. Only wish there was a solution for the one piece sights we are using for our LPVOs and such
Louis H.3/5Verified
Scope jack arrived same day I got my parts back from being cerakoted worked perfectly!
Scott D.5/5Verified
No need to play with levels or a plumb bob. The scope jack saved me a ton of time leveling and reconfirmed several of my rifles. Well worth the money
John A.5/5Verified
It’s came apart many many times. I don’t even know if it had a spring In it. I had to start keeping in in a ziplock bag. It keeps coming apart. Other than that I like it
John B.3/5Verified
I just put a new high-end scope on my Ruger Precision Rifle and used the Scope Jack to get perfect alignment with the picatinny rail; no more guessing on proper scope setup. Thanks Fix It Sticks -- I only wish I would have thought of the idea!
Steve H.5/5Verified
I’ve got a few expensive bubble level systems that I use to mount my scopes, but they take a lot of time to get set up and level your scope. There’s always some new gimmick that comes along and says it will make life easier or save time and so we buy it. Then before you know it we have a bunch of crap we don’t use or doesn’t work like they said.....
One day I came across this video on “Fix It Sticks” and watched the video on leveling your scope and how it saves time? I ordered one for some new scopes I ordered and all I can say; is WoW!!! It really does save time and makes leveling your scope so much easier! I can now mount my scopes on a new or old rifle in a fraction of the time of a leading brand bubble level system and I don’t have to worry if my rifle is sitting level or not. That saves me time and gives me more time at the range!
Fix It Sticks is the only scope leveling tool you will need and you can take it anywhere... Great job Fix It Sticks!!!!
Awesome product!!!
Mark D.5/5Verified
For all you in the reviews crying about making one for one piece mounts: Go buy a FUSE mount.
Cole R.5/5
Please make a version for use with one-piece mounts, which have come to dominate for good reason. I wish I didn't have one of these at all because I literally have zero optics with accessible rail under the turret.
Joe S.1/5
Easy to use worked as described
Patrick E.4/5Verified
As described
Tony A.5/5Verified
Good product!
Tom P.5/5Verified
Neat tool to use for leveling optics mounted to a pic rail.
Michael J.5/5Verified
Fancy! While there’s cheaper solutions this is a Fix It Stick … very uplifting.
Robert S.5/5Verified
It is as described.
Steven S.5/5Verified
Excellent product and does what it states. Never thought mounting scope could be so easy!
Hassan A.5/5Verified
Extremely easy to use: I got to mount my new scope and fix my older scope cant by using this tool. I cannot believe I have waited so long. When I found out about this tool, I was happy to know about this and purchased it immediately. I would recommend this to anyone looking to get rid of the challenge of mounting scopes.
Hassan A.5/5Verified
Awesome
Travis L H.5/5Verified
One of those things you wish you had thought of once you use it. I have mounted countless scopes and have questioned again and again if the scope was just a little off tilt. That is in the past as this little thing makes mounting a scope simple to get correct. Wish I had one years ago.
Monte M.5/5Verified
Looks good
Tyler5/5
Pretty slick & easy to use!
Matthew B.5/5Verified
it works
James R.5/5Verified
I thought Ihad my Nightforce scope leveled above my 737R action. Nightforce recommends using the bottom of scope to be parallel with rail to get windage reticle plumb to bore line. I put this scope jack to use and I had it off by quite a bit. I just cracked the mount caps slightly loose, cammed the jack up with a yellow nutdriver which squared the scope, and while keeping tension on jack I cross pattern tightened the caps. I cammed jack down and back up almost touching to see even daylight. My vertical retical is now dead on to center of barrel.
Douglas Y.5/5Verified
Easy to use fabulous addition to any scope mounting kit
Mike C.5/5Verified
Works as advertised just what I needed previously I was taking a long time to balance my scope to my rifle, with this tool I did it instantly
Derek M.5/5Verified
Great product
Joel I.5/5Verified
Very cool tools, and good quality. I bought them on a whim and have only used them once, although I have several scopes waiting to be mounted, and no room to put all the rifles with scopes, so I'm waiting. The jack is not critical, but simplifies the mounting process. The levels stay in place and confirm everything is mounted correctly. I have used paint stirring sticks for the same effect as the jack, but the jack stays put while I tighten all the mounting screws. The pair of levels and the jack are a little pricey, and you could get by with just one or the other, but they made the job fast and smooth. If you like specialty or unusual tools, these should make you happy. Plus they work well for their intended purpose.
Greg L.5/5Verified
Hello, I am writing to you about my experience as a consumer (buyer) from your store as the product was good, but I will not buy from you again from America because I did not know that it has many import costs such as customs clearance costs, customs costs, and costs for taxes, the import costs are high and I will not dare to buy from America again. Thank you with kind regards
Nikolaos B.5/5Verified
The Scope Jack worked perfect for leveling my GPO scope on my Bergara B14 squared Cest rifle. Well made and simple. The Scope Jack is the easiest way to level your scope mounted on a picatinny rail.
David W.5/5Verified
Amazing tracking thanks
Mohamed A.5/5Verified
works great to align to scope.
John S.5/5Verified
Portable
Don’t drag large, single-use tools into the field. Bring The Works to build what you need on the spot and tackle nearly anything.
Precision
With tools like our Individual Torque Limiters or All-in-One Torque Driver, you can work with incredible precision on the fly.
Performance
Made from the highest-quality materials and machined to fit each other precisely, parts are even magnetized to lock securely in place.
